Specifications
- Conveyor lengths to 80'
- Belt widths: 6" to 48"
- Belt speed: 250 ft/min maximum
- Loads up to 30 lbs. per square foot of belt
- 15°, 30°, 45° & 60° fixed angle modules standard
- Horizontal to incline, nose-over & z-frame configurations
- Continuous TIG welded 304 stainless steel frame
- #4 polish glass bead finish on all outside surfaces
- UHMW Wear strip bed plate
- Bearing material is 400 stainless steel
- Bearing lubricant is H1 type FDA lubricant
- Cleat Height available from .25" to 3"
- FDA Approved belting and plastic components
Features/Benefits
- Frame is constructed of continuous TIG welded 304 stainless steel and is designed with minimal horizontal surfaces for optimum cleaning. Conveyors over 20' consist of multiple sections which are bolted together.
- Bearings are 400 stainless steel, filled with H1 FDA lubricant and mounted in cast stainless steel or plastic housings for maximum performance in washdown environments.
- Optional solid bed plate is stainless steel or UHMW for high impact loading
- Belt tensioning mechanism is constructed of 304 stainless steel and externally mounted to the frame with adequate clearances for cleaning.
- Conveyor is designed to withstand high pressure (100-1500 PSI) spray and chlorinated solutions.
- Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
- Return belt supports are 4" UHMW Rollers and are easily removed without tools for effective cleaning.
- Optional belt lifters lift belt from wear strips/bed plate by simply pulling an external lever for fast access and effective cleaning.